Street ET

0

STREET ET

Updated 2/20/16

CLASS REQUIREMENTS                                                                                                 

CLASS DESCRIPTION: Street E.T. is open to street legal bikes only. The class is run in an E.T. bracket racing format and is a great class for the novice racer to gain valuable racing experience. Double entering a class will no longer be allowed in any class. A rider can not ride the same, nor a different, bike in one class.  Nominal increases to both the entry fees and the purses will be implemented. Specific details of such will be announced upon finalization.

DESIGNATION: The class designation is S/ET. All entrants must display this designation on both sides of their motorcycle by their bike number.

FORMAT: This is a 1/4 mile E.T. bracket class run on a .500 full tree. This is an all run field. All bikes must be 18.99 & quicker.

Maximum dial-in permitted 18.99.

POINTS

click here Points System & Caculations to see how points are scored

This class will be a points class at all MANUFACTURERS CUP events.

It will be the riders responsibility to monitor his or hers points earnings after every event. All requests for points adjustments must be made in writing to info@mancup.info within thirty days of the points posting for the event in question on all events EXCEPT the Finals. For the Finals ONLY, all requests for points adjustments, again, must be made in writing to info@mancup.info and within TEN days of the points being posted. Please understand the Man Cup will strive to keep the points tabulations for all classes accurately and correctly and we do hope by you monitoring your own points earnings that any errors or miscalculations can be corrected in a timely fashion.

Buybacks:

The buyback process will be replaced. A more simple and straightforward approach will replace it. ALL first round losers will automatically advance back into the second round. With the completion of the second, and all subsequent elimination rounds thereafter, upon losing, every rider will be out of competition.

The points earnings will change to reflect the updates made to the buyback process. All riders will now earn 21 points for entry, tech, first and second round of elimination rounds regardless of performance. This is up from 11 points awarded for entry and a minimum of 0, with a maximum of 20 additional round points through round two, contingent if a rider bought back or not. Rounds won points will remain unchanged at 10 per round but will begin accrual in the 3rd round and beyond. Winner and runner-up bonus points are also unchanged.

 

GENERAL: A rider may only run one bike in this class, and that bike may only be entered one time in this class.

Sunday Only Entry

Elimination of the Sunday morning time trial. Sunday morning will begin with the first round of ET eliminations. There will be a very quick clean-up time run for any SUNDAY ONLY entry, eligible only to a bike and/or rider who has not been down the track at all at any point prior. the elimination process will begin directly behind the clean-up time run.

BRAKES: Front and rear brakes are mandatory and must be in safe operating condition.

CHAIN GUARDS: Chain guards are required on all entries.

ELECTRICAL: 2-steps, delay boxes and electronic throttle stops are prohibited. Delay boxes and electronic throttle stops are not permitted on the motorcycle, they must be disconnected and removed.

LIGHTS: All motorcycles must have a functional OEM headlight or aftermarket headlight.

CLUTCH: Aftermarket slider clutches prohibited. Engine driven (MTC Gen II, Hayes, Rock, etc…) lockup clutches now prohibited along with aftermarket slider clutches. Wheel driven lockup clutches (MTC, MRE, Karata, etc) will continue to remain legal. All engine-driven lockup and aftermarket slider clutch entries will now have to compete in MPS Pro ET . Street ET is an entry level class. These drag race specific engine drive lockup and aftermarket slider clutches need now to compete in Pro ET . Bike equipped with an OEM slider (Honda 750 Automatic, etc…) clutch may retain the use of it in Street ET.

Updates to the clutch rule in Street ET . Engine driven (MTC Gen II, Hayes, Rock, etc…) lockup clutches will no longer be allowed along with aftermarket slider clutches. Wheel driven lockup clutches will remain legal. All engine-driven lockup and slider clutch entries will now have to compete in MPS Pro ET . Street ET is an entry level class and these high end, drag race specific clutches need to be moved to the higher level of competition found in MPS Pro ET .

TIRES: DOT street tires only are permitted. All tires must have visible tread. DOT slicks are not permitted.

WHEELIE BARS: Wheelie bars are prohibited.

GROUND CLEARANCE: The motorcycle must have a minimum of 2” ground clearance with rider sitting on the bike. Bikes equipped with a billet flat oil pan (not cast) or a wheelie bar are exempt from the 2″ ground clearance check.

GENERAL SAFETY: All riders must have a SNELL 95 or higher full face helmet, shoes above the ankle, leather gloves, and a leather jacket. Any rider running faster than 10.99 must also have leather pants. Pants and jacket are not required to be zipped together. Nylon or textile jackets and pants are not permitted, even if they have pads. All jackets and pants must be made of 100% leather.

Share.

Comments are closed.